Leather & Vinyl Colour | Small Kit for Colouring Leather, Vinyl, and Faux Leather | Viper Products

Our small kit for colouring leather, vinyl, and faux leather consists of products from Viper Products and contains everything you need to achieve a durable and attractive finish on surfaces made from leather, vinyl, faux leather, plastic, and other similar materials. The kit is suitable for touching up and recolouring boat interiors, furniture, car interiors, bags, and more, made from leather, faux leather, and vinyl. The small kit is estimated to cover approximately 2 square meters.

The colourant is based on a combination of polycarbonate and acrylic, known as PolyCryl, which is highly durable and resistant while being extremely flexible, providing a soft and long-lasting finish with a natural feel. The advantage of Viper PolyCryl is its excellent adhesion to vinyl, faux leather, bycast leather, and hard plastics, as well as its remarkable wear resistance.

Viper PolyCryl delivers a natural look to restored products made from leather, vinyl, faux leather, and plastic. The finish is permanent and does not transfer onto clothes or other materials that come into contact with the surface. The colour also remains intact if exposed to water, which is common in boat interiors, for example. The surface remains porous after colouring and allows oils and creams to penetrate during treatment.

To further enhance the finish, you can add 10% of the SafeLink hardener. This is especially recommended for recolouring surfaces that undergo extreme use.

Note: Vinyl, faux leather, bycast leather, PU leather, and plastic are "oily" materials. For the colourant to adhere properly to these surfaces, it is crucial to follow the instructions and clean and prepare the surface thoroughly before colouring; otherwise, there is a significant risk of the colour peeling or flaking off.

The kit includes:

• 100 ml Viper PolyClean cleaner
• 100 ml Viper Silicone Remover
• 100 ml Viper Ultra Prep
• 100 ml Viper PolyCryl leather & vinyl colourant
• 50 ml Viper Top Coat finish
• 10 ml Viper SafeLink hardener
• Sanding cloth
• Sponges
• Cloths
• Instructions

Instructions:

1. Clean the surface to be coloured twice with PolyClean.
2. Clean the surface twice with Silicone Remover.
3. Clean the surface twice with Ultra Prep.
4. Massage the first layer of PolyCryl Leather & Vinyl Colourant into the surface to reach folds and crevices.
5. Apply additional layers of colour until the surface is fully covered and satisfactory. Apply the colour in thin layers with a sponge. Dry with a hairdryer between each layer.
6. Apply 2 layers of Top Coat finish. Dry with a hairdryer between each layer. Add SafeLink hardener to the finish for extra durability. The hardener is activated by the heat of the hairdryer.