Leather & Vinyl Colourant for Audi | Kit for Coloring Leather, Vinyl, and Faux Leather | Viper Products

Our kit for coloring leather, vinyl, and faux leather is available in three different sizes: Small, Medium, and Large. It consists of products from Viper Products and contains everything you need to achieve a durable and stylish finish for car upholstery and other interior details made from leather, vinyl, faux leather, plastic, and other similar materials. We offer a wide range of Audi shades in our selection. 

The small kit covers approximately 2 square meters, the medium kit covers approximately 4 square meters, and the large kit covers approximately 10 square meters.

The paint is based on a combination of polycarbonate and acrylic, PolyCryl, and is highly durable and resistant, while being very flexible and providing a soft, long-lasting finish with a natural feel. The advantage of Viper PolyCryl is its excellent adhesion to vinyl, faux leather, and hard plastics, along with incredible durability.

Viper PolyCryl gives a natural look to restored products made of leather, vinyl, faux leather, and plastic. The finish is permanent and will not transfer onto clothes or other materials that may come into contact with the surface. The color will not peel off even if it comes into contact with water, which is common on door panels when the side window is rolled down in rainy weather, or when driving with the top down on a summer day. The surface remains porous after coloring and allows oils and creams to penetrate during treatment.

To further strengthen the surface finish, you can add 10% of the hardener SafeLink. This is particularly useful for re-dying surfaces exposed to extreme use.

Please note: Vinyl, faux leather, and plastic are "oily" materials. For the vinyl color to adhere properly to these surfaces, it is very important to follow the instructions and clean and prepare the surface thoroughly before coloring. Otherwise, there is a high risk that the color may peel off.

The kit includes: 

- 100/200/500 ml Viper PolyClean cleaner
- 100/200/500 ml Viper Silicone Remover
- 100/200/500 ml Viper Ultra Prep  
- 100/200/500 ml Viper PolyCryl leather & vinyl paint
- 100/200/500 ml Viper Top Coat finish 
- 10/20/50 ml Viper SafeLink hardener
- Sandpaper 
-  Sponges
-  Cloths
-  Instructions

How to apply:

1. Clean the surface to be colored twice with PolyClean.
2. Clean the surface 2-3 times with Silicone Remover.
3. Clean the surface 2-3 times with Ultra Prep
4. Apply the first and second coats of PolyCryl Leather & Vinyl color, ensuring you reach seams and creases.
5. Apply additional layers of color until it covers fully and you're satisfied. The color is elastic and cannot crack, no matter how many layers are applied. Dab on the color in thin layers with a sponge. Dry with a hairdryer between each layer.
6. Apply 2 coats of Top Coat finish. Add SafeLink hardener to the finish for extra durability.

Color Chart

Note: Color accuracy on screens may vary, so the colors shown in the chart may differ from the actual shade.